part # description ts117l 8 pin dip (50/tube) TS117PL 8 pin flatpack (50/tube) TS117PLtr 8 pin flatpack t&r (1000/reel) ts117ls 8 pin surface mount (50/tube) ts117lstr 8 pin surface mount t&r (1000/reel) ts117l units load voltage 350 v load current 120 ma max r on 35 ? www.clare.com ds-ts117l-r4.0 ts117l multifunction telecom switch 1 applications features description approvals ordering information pin configuration ts117l is a 350v, 120ma, 35 ? 1-form-a relay with an optocoupler in a single package. it provides high sen- sitivity and is an ideal solution for many telecom appli- cations. current limiting version is available ("l" suffix). telecommunications telecom switching tip/ring circuits modem switching (laptop, notebook, pocket size) hookswitch dial pulsing ground start ringer injection instrumentation multiplexers data acquisition electronic switching i/o subsystems meters (watt-hour, water, gas) medical equipment-patient/equipment isolation security aerospace industrial controls ul recognized: file number e76270 csa certified: file number lr 43639-10 bsi certified: bs en 60950:1992 (bs7002:1992) certificate #:7344 bs en 41003:1993 certificate #:7344 small 8 pin dip package low drive power requirements (ttl/cmos compatible) no moving parts high reliability arc-free with no snubbing circuits 3750v rms input/output isolation fcc compatible vde compatible no emi/rfi generation machine insertable, wave solderable surface mount and tape & reel versions available 1 2 3 4 8 7 6 5 ts117l pinout + led - relay ?led - relay collector - phototransistor emitter - phototransistor load - relay (mosfet output) load - relay (mosfet output) led - phototransistor ?+ led - phototransistor +/
parameter conditions symbol min typ max units relay portion (pins 7, 8) output characteristics @ 25? load voltage (peak) - v l - - 350 v load current (continuous) - i l - - 120 ma peak load current 10ms i lpk ---ma on-resistance i l =120ma r on -3035 ? off-state leakage current v l =350v i leak --1 a switching speeds turn-on i f =5ma, v l =10v t on - - 3.0 ms turn-off i f =5ma, v l =10v t off - - 3.0 ms output capacitance 50v; f=1mhz c out -25- pf load current limit i cl 130 170 210 ma relay portion (pins 1, 2) input characteristics @ 25? input control current i l =120ma i f 2-50ma input dropout current - i f 0.4 0.7 - ma input voltage drop i f =5ma v f 0.9 1.2 1.4 v reverse input voltage - v r --5 v reverse input current v r =5v i r - - 10 ? parameter min typ max units input power dissipation - - 150 1 mw input control current - - 50 ma peak (10ms) - - 1 a reverse input voltage - - 5 v total power dissipation - - 800 2 mw isolation voltage input to output 3750 - - v rms operational temperature -40 - +85 ? storage temperature -40 - +125 ? soldering temperature dip package - - +260 ? flatpack/surface mount package - - +220 ? (10 seconds max.) 1 derate linearly 1.33 mw/?c 2 derate linearly 6.67 mw/?c www.clare.com 2 ts117l rev. 4.0 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at these or any other conditions beyond those indicated in the opera- tional sections of this data sheet is not implied. exposure of the device to the absolute maximum ratings for an extend- ed period may degrade the device and effect its reliability. absolute maximum ratings (@ 25? c) electrical characteristics
parameter conditions symbol min typ max units detector portion (pins 3,4) output characteristics @ 25? phototransistor blocking voltage i c =10? bv ceo 20 50 - v phototransistor output current v ce =5v, i f =0ma i ceo - 50 500 na saturation voltage ic=2ma, i f =16ma v sat - 0.3 0.5 v current transfer ratio i f =6ma, v ce =0.5v ctr 33 100 - % detector portion (pins 5,6) input characteristics @ 25? input control current i c =2ma, v ce =0.5v i f 6 2 100 ma input voltage drop if=5ma v f 0.9 1.2 1.4 v input current i c =1?, v ce =5v i f 525- a (detector must be off) input to output capacitance (relay only) - c i/o -3- pf capacitance input to output - - - - - pf input to output isolation - v i/o 3750 - - v rms ts117l www.clare.com 3 rev. 4.0 electrical characteristics (continued)
www.clare.com 4 ts117l rev. 4.0 performance data* * the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in the written specifications, please contact our application department. ts117l typical led forward voltage drop (n=50 ambient temperature = 25 c) i f = 5madc 35 30 25 20 15 10 5 0 1.3625 1.4875 1.6125 1.7375 1.8625 led forward voltage drop (v) device count (n) ts117l typical on-resistance distribution (n=50 ambient temperature = 25 c) (load current = 120madc; i f = 2madc) 35 30 25 20 15 10 5 0 17.0 18.2 19.0 17.8 18.6 on-resistance ( ? ) device count (n) 17.4 ts117l typical blocking voltage distribution (n=50 ambient temperature = 25 c) 35 30 25 20 15 10 5 0 376.25 389.25 402.25 382.75 395.75 415.25 blocking voltage (v) device count (n) 408.75 ts117l typical i f for switch operation (n=50 ambient temperature = 25 c) (load current = 120madc) 0.75 1.35 1.95 0.45 1.05 1.65 2.25 led current (ma) device count (n) 25 20 15 10 5 0 ts117l typical i f for switch dropout (n=50 ambient temperature = 25 c) (load current = 120madc 25 20 15 10 5 0 0.75 1.35 1.95 0.45 1.05 1.65 2.25 led current (ma) device count (n) ) ts117l typical turn-on time (n=50 ambient temperature = 25 c) (load current = 120madc; i f = 2madc) 0.15 0.35 0.55 0.75 0.65 0.45 0.25 turn-on (ms) device count (n) 30 25 20 15 10 5 0 ts117l typical turn-off time (n=50 ambient temperature = 25 c) (load current = 120madc; i f = 2madc) 0.025 0.125 0.225 0.325 0.075 0.175 0.275 turn-off (ms) device count (n) 35 30 25 20 15 10 5 0 ts117l typical load current vs. temperature temperature ( c) load current (ma) 180 160 140 120 100 80 60 40 20 0 -40 -20 0 20 40 60 80 120 100 10ma 5ma 2ma ts117l typical leakage vs. temperature (measured across pins 7 & 8) temperature ( c) leakage ( a) -40 0.014 0.012 0.010 0.008 0.006 0.004 0.002 -20 0 20 40 60 80 100 ts117l typical blocking voltage vs. temperature temperature ( c) blocking voltage (v rms ) -40 420 410 400 390 380 370 360 -20 0 20 40 60 80 100 ts117l typical turn-on vs. temperature (load current = 120madc) temperature ( c) turn-on (ms) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -40 -20 0 20 40 60 80 120 100 2ma 5ma 10ma 20ma ts117l typical turn-off vs. temperature (load current = 120madc) temperature ( c) turn-off (ms) -40 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -20 0 20 40 60 80 100 2ma 5ma
ts117l www.clare.com 5 rev. 4.0 performance data* * the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in the written specifications, please contact our application department. ts117l typical turn-on vs. led forward current (load current = 120madc) led forward current (ma) turn-on (ms) 0 5 1015202530354045 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 50 ts117l typical turn-off vs. led forward current (load current = 120madc) 0 5 1015202530354045 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 50 led forward current (ma) turn-off (ms) ts117l typical on-resistance vs. temperature (load current = 120madc; i f = 2madc) temperature ( c) on-resistance ( ? ) -40 60 50 40 30 20 10 0 -20 0 20 40 60 80 100 ts117l typical i f for switch operation vs. temperature (load current = 120madc) temperature ( c) led current (ma) -40 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 100 ts117l typical current limiting vs. temperature temperature ( c) current (ma) 400 350 300 250 200 150 100 50 0 -40 -20 0 20 40 60 80 100 ts117l typical collector current vs. forward current (v ce = 0.5v) i f (ma) i c (ma) 0 2468 12 10 14 16 18 20 12 10 8 6 4 2 0 ts117l typical i f for switch dropout vs. temperature (load current = 120madc) temperature ( c) led current (ma) -40 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 -20 0 20 40 60 80 100 ts117l typical led forward voltage drop vs. temperature temperature ( c) led forward voltage drop (v) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 120 100 50ma 30ma 20ma 10ma 5ma ts117l typical normalized ctr vs. forward current (v ce = 0.5v) i f (ma) normalized ctr (%) 0 2 4 6 8 10 12 14 16 18 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 20 ts117l typical load current vs. load voltage (ambient temperature = 25 c) i f = 2madc load voltage (v) load current (ma) 150 100 50 0 -50 -100 -150 -4 -3 -1 -2 0 1 3 24 ts117l energy rating curve time load current (a) 10 s 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 1ms 100 s 100ms 1s 10ms 10s 100s ts117l typical normalized ctr vs. temperature (v ce = 0.5v) temperature ( c) normalized ctr (%) -40 8 7 6 5 4 3 2 1 0 -20 0 20 40 60 80 120 100 1ma 2ma 5ma 10ma 15ma 20ma
www.clare.com 6 ts117l rev. 4.0 dimensions mm (inches) mechanical dimensions 4.445 .127 (.175 .005) 3.302 (.130) 7.620 .254 (.300 .010) 6.350 .127 (.250 .005) 8.077 .127 (.318 .005) 2.540 .127 (.100 .005) 9.525 .254 (.375 .010) .457 .076 (.018 .003) .254 typ. (.010) .635 typ. (.025) 8 pin dip surface mount ( s suffix) 9.652 .381 (.380 .015) pc board pattern (top view) 6.350 .127 (.250 .005) 2.540 .127 (.100 .005) 7.620 .127 (.300 .005) 7.620 .127 (.300 .005) 8-.800 dia. (8-.031 dia.) 7.239 typ. (.285) 3.302 (.130) 7.620 .254 (.300 .010) 9.144 typ. (.360) 6.350 .127 (.250 .005) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) 9.144 .508 (.360 .020) .457 .076 (.018 .003) 8.077 .127 (.318 .005 ) 8 pin dip through hole (standard) pc board pattern (top view) 2.540 .127 (.100 .005) 8.305 .127 (.327 .005) 1.905 .127 (.075 .005) 1.498 .127 (.059 .005) pc board pattern (top view) 2.540 .127 (.100 .005) 8.763 .127 (.345 .005) 1.193 (.047) .787 (.031) 8 pin flatpack ( p suffix) 7.620 .254 (.300 .010) 2.159 typ. (.085) 2.286 max. (.090) 9.398 .127 (.370 .005) 6.350 .127 (.250 .005) 9.652 .381 (.380 .015) 2.540 .127 (.100 .005) 8.077 .127 (.318 .005) .457 .076 (.018 .003) .203 (.008) .635 .127 (.025)
ts117l www.clare.com 7 rev. 4.0 dimensions mm (inches) mechanical dimensions tape and reel packaging for 8 pin flatpack package 7.493 .102 (.295 .004) 12.090 (.476) 1.753 0.102 (.069 .004) 3.987 .102 (.157 .004) 1.498 .102 (.059 .004) 6.731 max. (.265) .406 max. (.016) 4.877 (.192) top cover tape 2.007 .102 (.079 .004) 11.988 .102 (.472 .004) user direction of feed .050r typ. 16.002 .305 (.630 .012) 10.287 (.405) embossment embossed carrier top cover tape thickness .102 max. (.004) 10.287 .102 (.405 .004) 1.549 .102 (.061 .004) 330.2 dia. (13.00) 18 tape and reel packaging for 8 pin surface mount package 7.493 .102 (.295 .004) 12.090 (.476) 1.753 .102 (.069 .004) 3.987 .102 (.157 .004) 1.498 .102 (.059 .004) 6.731 max. (.265) .406 max. (.016) 4.877 (.192) top cover tape 2.007 .102 (.079 .004) 11.989 .102 (.472 .004) user direction of feed .050r typ. 16.002 .305 (.630 .012) 10.300 (.405) embossment embossed carrier top cover tape thickness .102 max. (.004) 10.300 .102 (.405 .004) 1.549 .102 (.061 .004) 330.2 dia. (13.00) 18
worldwide sales offices clare locations clare headquarters 78 cherry hill drive beverly, ma 01915 tel: 1-978-524-6700 fax: 1-978-524-4900 toll free: 1-800-27-clare clare micronix division 145 columbia aliso viejo, ca 92656-1490 tel: 1-949-831-4622 fax: 1-949-831-4628 sales offices americas americas headquarters clare 78 cherry hill drive beverly, ma 01915 tel: 1-978-524-6700 fax: 1-978-524-4900 toll free: 1-800-27-clare eastern region clare 603 apache court mahwah, nj 07430 tel: 1-201-236-0101 fax: 1-201-236-8685 toll free: 1-800-27-clare central region clare canada ltd. 3425 harvester road, suite 202 burlington, ontario l7n 3n1 tel: 1-905-333-9066 fax: 1-905-333-1824 western region clare 1852 west 11th street, #348 tracy, ca 95376 tel: 1-209-832-4367 fax: 1-209-832-4732 toll free: 1-800-27-clare canada clare canada ltd. 3425 harvester road, suite 202 burlington, ontario l7n 3n1 tel: 1-905-333-9066 fax: 1-905-333-1824 europe european headquarters cp clare nv bampslaan 17 b-3500 hasselt (belgium) tel: 32-11-300868 fax: 32-11-300890 france clare france sales lead rep 99 route de versailles 91160 champlan france tel: 33 1 69 79 93 50 fax: 33 1 69 79 93 59 germany clare germany sales activecomp electronic gmbh mitterstrasse 12 85077 manching germany tel: 49 8459 3214 10 fax: 49 8459 3214 29 italy c.l.a.r.e.s.a.s. via c. colombo 10/a i-20066 melzo (milano) tel: 39-02-95737160 fax: 39-02-95738829 sweden clare sales comptronic ab box 167 s-16329 sp ? nga tel: 46-862-10370 fax: 46-862-10371 united kingdom clare uk sales marco polo house cook way bindon road taunton uk-somerset ta2 6bg tel: 44-1-823 352541 fax: 44-1-823 352797 asia/pacific asian headquarters clare room n1016, chia-hsin, bldg ii, 10f, no. 96, sec. 2 chung shan north road taipei, taiwan r.o.c. tel: 886-2-2523-6368 fax: 886-2-2523-6369 http://www.clare.com clare, inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity are expressed or implied. except as set forth in clare s standard terms and conditions of sale, clare, inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limit- ed to, the implied warranty of merchantability, fitness for a partic- ular purpose, or infringement of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in sys- tems intended for surgical implant into the body, or in other appli- cations intended to support or sustain life, or where malfunction of clare s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. clare, inc. reserves the right to discontinue or make changes to its products at any time without notice. specification: ds-ts117l-r4.0 ?copyright 2001, clare, inc. all rights reserved. printed in usa. 8/16/01
|
